Dryer Repair in Somerset, KY
A dryer that runs but doesn't heat, takes two cycles to finish a load, or makes a loud thump is telling you something's worn out. We repair gas and electric dryers from every major brand, with same-day appointments available for most Somerset homes. A dryer that smells hot or burnt should be treated as an emergency — call now.
Is Your Dryer Trying to Tell You Something?
Dryer problems usually show themselves gradually. These are the issues Somerset homeowners call us about most.
Running but not heating
Usually a failed heating element or a tripped thermal fuse, both quick fixes.
Taking multiple cycles to dry
Often caused by a clogged vent, a worn belt, or a failing moisture sensor.
Loud thumping or squealing
Usually a worn drum roller, belt, or bearing that needs replacing.
Burning smell
Stop using the dryer immediately and call us — this can be a lint buildup or wiring issue.
Won't start at all
Often a door switch, thermal fuse, or start switch issue we can quickly test.
Drum won't turn
A broken belt or motor issue is the usual cause when the drum stays still.
Our Dryer Repair Process
Dryers rely on heat, airflow, and moving parts working together, so we check each in turn.
Check heat and airflow
We test the heating element, thermal fuse, and vent for blockages first, since these cause most complaints.
Inspect belts and rollers
Mechanical wear is checked next if the heating system tests fine.
Explain the findings clearly
You'll know the cause and the cost before any repair begins.
Repair and run a test cycle
We run a full drying cycle to confirm proper heat, tumble, and airflow before we leave.
Dryer Brands We Repair
We service gas and electric dryers from all the major brands sold in Somerset.
Other Dryer Repairs We Handle
Dryer Repair Questions
Yes, stop using the dryer right away and call us. It's often built-up lint or a wiring issue, both of which are fire risks if ignored.
Yes, our technicians are trained to work with gas lines and ignition systems following proper safety procedures.
This is almost always caused by a clogged vent restricting airflow, though a worn heating element can also be the cause.
Yes, this is usually a door switch, thermal fuse, or power issue, and it's typically diagnosed and fixed in one visit.
Helpful Reading Before Your Repair
Get Your Dryer Fixed Today
Call now for a same-day appointment, or reach out online and we'll get right back to you.